Trinnov Amplitude 8

Fordele ved trinnov amplitude 8

  • Forstærkeren er designet og bygget af Trinnov til at matche deres Altitude platform.
  • Amplitude 8 har lav forvrængning. Forstærkeren har balanceret XLR indgang.
  • Forstærkeren har DB25 balanceret indput for 8 x balancedrede indgange fra en Altitude 32 processor.
  • 2 x 230V tilslutning gør forstærkeren ekstra strømstærk, til at trække tungere højtalere.
  • 12V trigger styring.
  • Trinnov yder 5 års garanti på forstærkeren.

Beskrivelse

Trinnov Audio Amplitude 8 er en vellydende kraftig 8 kanals digital effektforstærker til hjemmebiografen.

Amplitude 8 har dobbelt strømforsyning og kræver 2 x 230V. tilslutning.

Trinnov Amplitude 8 leverer 8 x 375W i 4 Ohm RMS og 8 x 500w i 2 Ohm RMS.

Forstærkeren har balanceret XLR indgang.

Forstærkeren kan også tilsluttes Trinnov Altitude 32 via et balanceret kabel, så alle 8 kanaler bliver leveret via et DB25 buskabel.

Vi får lavet de kabler specielt med massivt finsølv, når det skal være ekstra godt.

Der er 5 års garanti på Amplitude 8

Superior Audio Performance

Achieving maximum performance in an Trinnov Altitude 32 theater requires equally proficient amplification.

That is the reason we created the Amplitude 8 power amplifier.

Optimized to work with Trinnov processors, it integrates seamlessly with the Altitude both visually and technically, and in operation creates a powerful three-dimensional soundstage, with huge dynamic range and bass impact to equal and exceed that of the best commercial theaters.

Achieving maximum performance in an Altitude 32 theater requires equally proficient amplification.

That is the reason we created the Trinnov Amplitude8 power amplifier.

Optimized to work with Trinnov processors, it integrates seamlessly with the Altitude both visually and technically, and in operation creates a powerful three-dimensional soundstage, with huge dynamic range and bass impact to equal and exceed that of the best commercial theaters.

Think of this 8-channel class-D power amplifier as two high-output four-channel amplifiers on a single chassis, each with its own power supply.

Each linear power supply is built around a separate heavy-duty toroidal power transformer, enabling every module of the Amplitude 8 to deliver 225W into 8 ohms, 375W into 4 ohms and 500W into 2 ohms.

In fact, the Amplitude 8 requires two AC power connections.

Amplification Technology

  • State of the Art Performance
  • The Hypex Ncore® NC1200 class-D power module represents the state-of-the-art for audiophile performance, with unparalleled clarity, musicality and resolution.

  • It features the industry’s lowest distortion and noise specifications, and its performance is frequency-independent.

  • You’ll find it in the finest audiophile monoblocks, and that’s why we use it in the Trinnov Amplitude 8.

    The audio performance of the Amplitude 8 satisfies the most demanding audiophiles, and when watching movies, you’ll find its silent background noise and enormous dynamic range ensures you’ll hear every detail in the quietest passages and clean, undistorted output and impact when the soundtrack is at its highest loudness levels.

  •  

Specifikationer for Amplitude 8

  • Power Output (8Ω, 20-20kHz 0.05% THD+N):225 Watts RMS x8
  • Power Output (4Ω, 20-20kHz 0.05% THD+N):375 Watts RMS x8
  • Power Output (2Ω, 20-20kHz 0.05% THD+N):500 Watts RMS x 8
  • Audio Performance
    Frequency Response:+/- 0.5dB 0Hz to 20 kHz, load independent
  • Damping Factor:> 6000 at 100 Hz, > 2000 20Hz to 20 kHz
  • Signal to noise ratio:125dB Referenced To Rated Output (A-Weighted)
  • Crosstalk:< 85 dB
  • Audio Inputs & Outputs
    Input Connectors:1x Balanced (XLR) per channel
  • Input Polarity:Pin 2 +ve, Pin3 -ve ( for non-inverting output)
  • Input Impedance:47 kΩ, each phase
    Input Sensitivity:6.15V (+18dBu) RMS balanced in = 225W into 8Ω out
  • Output Connectors:1x 5 way binding post per channel
  • Power Supply
    Power Requirement:2x 117V / 230V 50/60 Hz AC
  • Power Consumption:<1W Standby, <80W idle, Max 1,8kW x2 full load
    Mains Fuse:15A (117V) / 8A (230V) both slow blow
  • 12V Trigger:1x in, 1x out (mini-jack TS)
  • Weights & Dimensions
    Dimensions (W x H x D) mm:443 x 186.5 x 502 mm
  • Dimensions (W x H x D) inches:17 3/4″ x 7 11/32″ x 19 3/4″
    Shipping box dimensions (W x H x D) cm:70 x 61 x 38
  • Weight:48 Kg / 106 lbs
  • Shipping weight / volume:59kg / 0.162 M3
  • Warranty
    Standard Warranty:5 year

Custom Integration Features

  • Designed for immersive home theaters, with custom integration in mind, the Amplitude 8  becomes perhaps the most versatile power amplifier available today, providing integrators with the unique ability to meet diverse channel counts and power requirements.

Se også