Trinnov Amplitude 8m

Fordele ved trinnov amplitude 8m

  • Forstærkeren er designet og bygget af Trinnov til at matche deres Altitude platform.

  • Trinnov Amplitude 8m har lav forvrængning.

  • Forstærkeren har balanceret XLR indgang.
    Forstærkeren har DB25 balanceret indput for 8 x balancedrede indgange fra en Altitude 32 processor.

  • 12V trigger styring.

  • Trinnov yder 5 års garanti på forstærkeren.

Beskrivelse

Trinnov Audio Amplitude 8m er en vellydende kraftig 8 kanals digital effektforstærker til hjemmebiografen.

Trinnov Amplitude 8m leverer 8 x 200W i 8 Ohm RMS og 8 x 300W i 4 Ohm RMS

Forstærkeren har balanceret XLR indgang.

Forstærkeren kan også tilsluttes Trinnov Altitude 32 via et balanceret kabel, så alle 8 kanaler bliver leveret via et DB25 buskabel.

Vi får lavet de kabler specielt med massivt finsølv, når det skal være ekstra godt.

Der er 5 års garanti på Amplitude 8m

Superior Audio Performance

A perfect companion to our brand new Altitude 16 and Altitude 32 made with the most demanding users in mind, our new 8 channel amplifier brings intelligent power and pristine audio quality at a sensitive price point without any compromise in terms of design and build quality.

Like its big brother the Amplitude 8, the Amplitude 8m is designed to deliver spectacular performance in a luxury home theater but at a fraction of the price.

Intelligent Power

Our amplifiers use microprocessor control for turn-on delay and feature an automatic AC power recognition and configuration system. The amplifiers not only recognize whether they are hooked up to 117V or 230V nominal power, they automatically self-configure.

The Amplitude8M also incorporates a new “sleep” circuit.

Sleep Circuit
The Amplitude 8m incorporate a new “sleep” circuit.

When the amplifier stays idle for a period of more than 10 minutes, power is removed from the output modules and a front-panel LED begins to flash.

As soon as an input signal is detected again on any channel, normal playback operation resumes instantaneously.

Amplification Technology

  • Using the Hypex N-Core Class D output module, each of the eight channels can deliver up to 300 watts RMS at 4Ω.

    The amplification stage features the industry’s lowest-distortion and noise specifications, and what little noise there are remains frequency independent with a Signal to Noise Ratio 

  • >120dB referenced to full power.

  • The importance of this trait cannot be over-estimated in a theater that may have twenty or thirty speakers in a single room. If each of those speakers were producing even a small amount of noise, it would rapidly become noticeable and unacceptable. This scenario never arises with The Amplitude 8m .

Specifikationer for Amplitude 8m

  • Power Output (8Ω, 20-20kHz 0.05% THD+N)
  • 200 Watts RMS x 8
    Power Output (4Ω, 20-20kHz 0.05% THD+N)
  • 300 Watts RMS x 8
    Gain:19dB (Test window 18.6 to 19.6dB, centre is 19.1dB)
  • Audio Performance
    Frequency Response:+0, -0.5 dB, 5 Hz to 20kHz, load independent
  • Damping Factor:>800 20Hz to 20kHz
    Signal to noise ratio:-120 dB referenced to rated output
  • Crosstalk:< 90dB
  • Intermodulation Distortion:Less than 0.05%
  • Audio Inputs & Outputs
    Input Connectors:1x Balanced (XLR) per channel
  • Input Polarity:Pin 2 +ve, Pin3 -ve (for non-inverting output)
  • Input Impedance:47 kΩ, each phase
    Output Connectors:1x 5 way binding post per channel
  • Power Supply Requirement:117V / 230V 50/60 Hz AC (auto select)
  • Power Consumption:<0.5W Standby, <80W idle, <40W Sleep, Max 2kW
  • Power Input:IEC C20
    Mains Fuse:20A (117V) / 10A (220V) both slow blow
  • 12V Trigger:1x in, 1x out (mini-jack TS)
  • Weight & Dimensions
    Dimensions (W x H x D) mm, including rack ears:482 x 132 x 433
  • Dimensions (L x H x P) inches, including rack ears:19” x 5 2/8” x 17”
  • Shipping box dimensions (W x H x D) cm:61 x 61 x 42
  • Weight:29.8kg / 65.5 lbs
    Shipping weight / volume:36kg / 0.156 M3
  • Standard Warranty:5 year

Custom Integration Features

  • Designed for immersive home theaters, with custom integration in mind, the Amplitude 8M becomes perhaps the most versatile power amplifier available today, providing integrators with the unique ability to meet diverse channel counts and power requirements.

Se også